4 Black PAR CAN 64 300W DYS PAR64 RF Dimmer C-Clamp

C-Clamp - Heavy Duty Mounting Clamps for DJ Lighting application

The MCC-1 is a metal "C-Clamp" that can be used on any truss with a diameter of 1-2 inches. 
This C-Clamp can be used up to a maximum load of 50 lbs.
The C-Clamps are used in stage lighting applications as theatrical, concert, and events where all types of hanging positions and angles are used with fixtures as Pin spots, Par Cans, LED PARs, wireless DMX receivers, Dimmer Packs and other small lighting equipments that don't move.
The C-Clamps will hold the fixture on the desired angle compare with an O-Clamp that will only really properly hold a fixture hanging right under the truss or hanging sideways off a vertical truss and then it is recomanded to be used safty cables. 
C-Clamps can be used in a wide variety of pipe sizes up to 2 inch (or box tube or whatever in a pinch), making them a much more versatile hanging option.

Features:
- durable heavy duty steal clamp
- fit truss or pipe with diameter from 1 to 2 inch, as LTS06 - 9 ft Lighting Stand, LTS01 - 12 Ft. Lighting Stand and LTS31 & LTS31C Truss Systems,
- the C-Clamp is perfect for hanging relay/dimmer packs, pin spots, par cans, fog machines, snow machines and other DJ lighting fixtures

This item is currently unavailable until end of August. If you would like to purchase this item, please contact our sales department at (888)505-2111.

The PAR64 Reflectors are to be lightweights and cost effective in comparison to the standard par lamps. The standard par socket can connect with the mogul socket this reflector uses. The PAR Reflectors are for use with the DYS 300w-600w lamps or DYR 220v 650w lamp.

This is a Ushio DYS 300W/120V Tungsten halogen light bulb. It uses 300W/120V and has an average rated life of 100 hours. Its color temperature is 3200K. It carries a GY9.5 dual pin base with a CC-6 filament.

Applications
•    Entertainment
Features
•    Ushio JCD120V300WC Halogen Bulb
•    Single Ended Lamp
•    300 Watt Version DYS
•    JCD-0302 JCD0302/ Use Only in Approved Enclosed Halogen Fixtures
•    Replacement for ZB-JCD300

This new dimmer pack from Optima Lighting is similar to  Chauvet DMX-4 and Eliminator ED-15, and the difference between this unit and others is that it has many functions.
The unit able to work as 1, 2, or 4-channel dimmer or relay pack.
This pack can serve as a stand-alone chaser or a DMX dimmer pack.
This pack is a zero-crossing circuitry, which protects against inductive loads. Each channel comes with two 3-prong Edison sockets for USA.
This unit features XLR female and male connection for DMX compatibility. Each channel has a fuse.

Features:

- 3 pin XLR female and male connectors for DMX control 
- One, two or four channel configuration option 
- Dimming or switching setting of any channel in DMX or manual mode 
- Digital display for easy setting and control 
- Double output 110v grounded outlet per channel
- 16 built in preset programs - Music mode with sound sensitivity knob 
- Full manual control over each channel in DMX or manual mode 
- Output: 4.5Amp per channel, True 15Amp. Maximum 
- External fuses 
- 110v 60Hz / 220v 50Hz switch 
- Rope light connection output 
- On / off main power switch 

Warranty: 1 Year Manufacturer warranty.

This PAR can is an electric enclosure that has uses in commercial, residential, and transportation illumination. The Par 64 long barrel design eliminates glare and supports wattages as high as1000 watts.

Some special features:

• Lightweight
• Aluminum Construction
• Black Finish
• Line Cord with Molded 110V House Plug
• Gel Frame (gel sheets sold separately)
• GX16d Socket
• Mesh Safety Screen

Thanks to its light weight body, the PAR64B is ideal for traveling to productions and events that demand high quality lighting.

Please Note: This PAR can is supplied with a GX16d Socket