4 Black PAR CAN 64 500w PAR64 NSP O-Clamps Stand Dimmer

An "O" shaped plastic molded Clamp that can be used on a truss with a diameter of 1.5 or 2 inches (if you remove the 0.5 inch adapter). This O-Clamp is designed for a maximum load of 60 lbs and is a great choice for mobile applications.

This Platinum 500 watt PAR64 Par can bulb is a narrow spot with a beam angle of 12. It has a base of GX16d mogul end prong, a color temperature of 2850k and a lumen of 6500. Its diameter is 8 inches, maximum overall length is 6 inches and the filament is CC-13. This Platinum 500 watt PAR64 Par can bulb is a reflector, has a voltage of 120 and is a Incandescent bulb.

Optima Professional LTS01 is a lightweight tripod system designed for hanging par cans and pin spots. The stand is made of black steel and telescopes to 12 feet. Comes complete with T-bar support. - Black high quality aluminum tripod with 1 T-bar & 2 side bars - 8 hanging point bolts - Collapses down for easy transport

The Par 64 long barrel design eliminates glare and lets you use lamps from 500 watts to 1000 watts with a beam spread from a very narrow spot to a wide flood. Ideal for use if the projection distance is 30'-50'. Features: - Lightweight - Aluminum Construction - Black Finish - Line Cord with Molded 110V House Plug - Gel Frame - GX16d Socket - Mesh Safety Screen You need the best possible PAR 64 can for your large scale venue or show. With throw distances up to 50ft and its ability to support 500w and 1,000w lamps, this PAR 64 polished chrome can get the job done for you. Its aluminum construction and lightweight body make it ideal for traveling productions that demand high quality light. No matter what you use it for you need a high quality PAR can 64 in your lighting arsenal that you can count on. Please Note: This PAR can is supplied with a GX16d Socket

The unit is 1, 2, or 4-channel MATRIX DMX DIMMER pack. This pack can serve as a stand-alone chaser or a DMX dimmer pack. This pack is designed for zero-crossing circuitry, which protects against inductive loads. Each channel comes with two 3-prong Edison sockets for USA or IEC sockets for Europe. This unit features XLR female and male connection for DMX compatibility. Each channel is Equipped with a fuse, the Max. Features - Mode button - this button will change the power packs operate mode between DMX and chaser. - Menu button - this button will activate the different functions in DMX and chase modes. - Up button - this button will increase the displayed value in the LCD display. - Down button - this button will decrease the displayed value in the LCD display. - Power output - 3 prong grounded Edison output sockets or 8 total output sockets. - Green LED indicators - these LED will indicate their relevant channel activity. - LED display - this multifunction display will detail all chase and pro-creativity that pertains to the current operating to the current operating mode of the pack. - Channel fuses - each of the four channels is protected by 10A (120V) or 6.3A(230V) fuse. These fuses prevent you from overloading and damaging your pack. Be sure to always replace with the exact same type fuse. - Power switch - this switch controls the unit’s main power. - Power cord - plug this cord into a matching power supply for your area. - DMX input - this connector accepts your DMX input signal. - DMX output - this connector sends your DMX input signal through to the next DMX device. - 5 ft. power cord