4 PAR CAN 64 LED PAR64 C-Clamp Stand XLR Cable Controller LED1150

C-Clamp - Heavy Duty Mounting Clamps for DJ Lighting application

The MCC-1 is a metal "C-Clamp" that can be used on any truss with a diameter of 1-2 inches. 
This C-Clamp can be used up to a maximum load of 50 lbs.
The C-Clamps are used in stage lighting applications as theatrical, concert, and events where all types of hanging positions and angles are used with fixtures as Pin spots, Par Cans, LED PARs, wireless DMX receivers, Dimmer Packs and other small lighting equipments that don't move.
The C-Clamps will hold the fixture on the desired angle compare with an O-Clamp that will only really properly hold a fixture hanging right under the truss or hanging sideways off a vertical truss and then it is recomanded to be used safty cables. 
C-Clamps can be used in a wide variety of pipe sizes up to 2 inch (or box tube or whatever in a pinch), making them a much more versatile hanging option.

Features:
- durable heavy duty steal clamp
- fit truss or pipe with diameter from 1 to 2 inch, as LTS06 - 9 ft Lighting Stand, LTS01 - 12 Ft. Lighting Stand and LTS31 & LTS31C Truss Systems,
- the C-Clamp is perfect for hanging relay/dimmer packs, pin spots, par cans, fog machines, snow machines and other DJ lighting fixtures

The Optima Professional LTS01 is a lightweight tripod system designed for hanging par cans and pin spots. The stand is made of black steel and telescopes to 12 feet. Comes complete with T-bar support. - 12' Lighting Stand - Black high quality aluminum tripod with 1 T-bar & 2 side bars - 8 hanging point bolts - Collapses down for easy transport

The PAR 64 LED is a DMX-512 controllable, full RGB color mix par can be up of highly efficient and double-sized bright LED's. All red, green and blue LED's can be controlled separately allowing the creation of an unlimited range of colors. The PAR 64 LED can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 5 DMX channels.
FEATURES
- Built-in automated programs via master/slave
- Built-in sound activated programs via master/slave
- Ultra bright and ultra large LED's (10mm)
- High Quality Lightweight Professional Aluminum Par 64 CAN with Double-bracket yoke
- Perfect for Mobile, Club, Stage and Architectural applications
- Easy to setup and use

LEDs ADVANTAGE:
- Save Energy
- No Lamp Replacement needed!
- Unlimited Colors - No gel Sheets
- No heat
- Fully DMX
- Light weight

Technical Information:
- Light Source: Red: 61 LEDs, Green: 61 LEDs, Blue: 61 LEDs
- Beam Angle: 25°
- Total Output power: 12W
- Control modes: DMX, Auto, Sound, M/S (Linking)
- Channel function:
Channel 1: Red intensity
Channel 2: Green intensity
Channel 3: Blue intensity
Channel 4: Dimmer
Channel 5: Strobe Speed

- Built-in programs: Single color, multi-colors, rainbow, variable strobe

PAR64LED, PAR 64 LED, PAR64 LED

PAR LED-C is a RGB LED controller featured with color chase, and fades of RGB LED, and operated via DMX, sound active, etc. that will provide you splendid vision enjoyment. This controller not have the ability to control each unit individually - control all units at the same time. Features: - Blackout- Disables or enables all channel outputs. - FULL ON - All LEDs on. - SOUND ACTIVE - Activates Sound Active mode. Chase mode must be active for Sound Active to work. - MASTER FADE - to control the dimming and strobe effect. - SPEED/FADE TIME FADE - adjust the speed of the chaser or the fade time of a program. - CHASE/COLOR MIX FADE - choose your chase or color mix. - COLOR MIX BUTTON - activate the Color mix programs. Use the Chase/Color Mix fade to select one of 32 Color mixes. - CHASE BUTTON - activate the Chase programs. Use the Chase/Color Mix fade to select one of 12 chases. - HOLD BUTTON - use to hold one of nine colors. - COLOR SELECT BUTTONS - Select one of the nine colors. Hold must be selected for Color Select to work. Specifications: - DMX Output: 3Pin female XLR

20 foot XLR extension cable. Male 3 pin XLR to female 3 pin XLR,XLR