8 Black PAR CAN 38 90w PAR38 SP Dimmer O-Clamp 2 Stand

O CLAMP - DJ & Stage Lighting Heavy Duty Mounting O Clamp

The "O clamps" are used to securely mount your lights with the heavy duty 360 degree wrap around tube o clamp.
The O clamps are made of molded plastic to protect your lighting fixture from scrachings. 
An o clamps can be used on a truss with a diameter of 1.5 or 2 inches (if you remove the 0.5 inch adapter).
This O-Clamp is designed for a maximum load of 60 lbs and is a great choice for mobile applications.

Features:
- removable adapter to be converted from 1.5 in to 2 in. size,
- great for the LTS06 - 9 ft Lighting Stand, LTS01 - 12 Ft. Lighting Stand and LTS31 & LTS31C Truss Systems,
- Non-scuffing,
- Non-scratching,
- Non-scoring,
- Non-denting,

Optima PRO PAR can 38 (Black) has a medium screw base socket. It includes a power cord and gel frame. It can be used with medium screw base PAR 38 or R-40 lamps with a maximum wattage of 250W. Ideal for mobile or permanent application.

Product Features:
• Black color
• Steel construction
• Includes gel frame
• Socket 
• Cord with plug

Please Note: This PAR can is supplied with a E27 Medium Screw Socket

This item is currently unavailable. For further information, please contact us at (888)505-2111.

This Platinum 90 watt PAR38 Par can bulb is a spot with a beam angle of 12. It has a base of E26 medium screw, a rated life of 2500 hours, and a lumen of 1310. Its diameter is 4.75 inches, maximum overall length is 5.312 inches. The filament is a CC-8. This Platinum 90 watt PAR38 Par can bulb has a voltage of 120 and is a halogen bulb.

The unit is 1, 2, or 4-channel MATRIX DMX DIMMER pack. This pack can serve as a stand-alone chaser or a DMX dimmer pack. This pack is designed for zero-crossing circuitry, which protects against inductive loads. Each channel comes with two 3-prong Edison sockets for USA or IEC sockets for Europe. This unit features XLR female and male connection for DMX compatibility. Each channel is Equipped with a fuse, the Max.

Features - Output: 4.5Amp per channel, True 15Amp. Maximum 
- Mode button - this button will change the power packs operate mode between DMX and chaser.
- Menu button - this button will activate the different functions in DMX and chase modes.
- Up button - this button will increase the displayed value in the LCD display.
- Down button - this button will decrease the displayed value in the LCD display.
- Power output - 3 prong grounded Edison output sockets or 8 total output sockets.
- Green LED indicators - these LED will indicate their relevant channel activity.
- LED display - this multifunction display will detail all chase and pro-creativity that pertains to the current operating to the current operating mode of the pack.
- Channel fuses - each of the four channels is protected by 10A (120V) or 6.3A(230V) fuse. These fuses prevent you from overloading and damaging your pack. Be sure to always replace with the exact same type fuse.
- Power switch - this switch controls the unit’s main power.
- Power cord - plug this cord into a matching power supply for your area.
- DMX input - this connector accepts your DMX input signal.
- DMX output - this connector sends your DMX input signal through to the next DMX device.
- 5 ft. power cord