This is a Complete Plug and Play KIT with Waterproof Warm White / Cool White LED strip, Power Supply and Controller.
This LED strip has the ability to change the color temperature from Warm White to Cool White.
The Remote Controller is used to adjust from warm white to cool white and to adjust the brightness of the LEDs.
- 16.4 Ft. (5 Meter) Warm White - Cool White Flexible Crystal Clear Epoxy Waterproof LED Strip
- Power Supply with On/Off Switch
- Remote Controller (adjusting the color temperature from warm white to cool white and brightness)
- LED Strip must be stored in the dry and sealing environment:
1. Operating temperature: -4 Deg ~ + 122 Deg Fahrenheit
2. Storage temperature: -40 Deg ~ + 158 Deg Fahrenheit
- The waterproof strip is used semi-outdoors.
- SMD LED used soft silica gel in encapsulation, so you shall keep LED surface well to avoid pressure, push and scratch during using.
- LED strip shall work under voltage DC12V +/- 5% or it may cause various malfunction.
- Make sure that input voltage, polarity and power supply are connected well before lighting up.
- The length shall be not more than 5 meters (16.4 ft or 196.85 inches).
- Once the LED is cut to your measurement, the part of the strip that is severed, can no longer be used.
|Number of LEDs||480|
|LED Chip Size||3528 SMD|
|Cable Type||Silicone Cover|
|Length (in)||196.85 in or 16.4 ft|