Diode LED 1FT DI-1106 K-Range Tunable Warm White to Cool White High Performance LED Strips
K-Range Tunable Color Strip Light gives you total control over the white color temperature of your LED lighting. With the K-Range Dual Slide Switch you can choose the exact shade of white light for your LED lighting, as well as dim your lights from 100% to 5%. This strip light enables you to set up dimmable, color-temperature-controlled white LED lights.
The K-Range Tunable Strip Light offers full tuning of color temperature, from warm white (2700k) to cool white (5500k) with every color temperature in between. This strip uses a mix of warm white, neutral white, and cool white LED’s, which the K-Range Dual Slide 12V Switch dims and brightens to allow you to smoothly and easily transition between color temperatures.
K-Range Tunable Color Strip Light comes in one foot sections, and a maximum of 16 one-foot strip sections can be seamlessly connected together in a continuous sequence. Runs longer than 16 feet can be configured, but each run needs to be hard-wired back to the power supply. These additional accessories are essential for a K-Range Strip installation: the K-Range Dual Slide 12V Switch (DI-1100) and one K-Range Strip-to-Strip Connector (DI-1102) for each foot of strip light. Each strip comes with 3M™ adhesive tape on the back for easy mounting.
The K-Range Tunable Color Strip Light can be powered by either a 12V Non-Dimmable Hard-Wired Driver (p. 72) or a 12V Plug-In Adapter (p. 24). The K-Range Dual Slide Switch (p. 21) fits into a standard light switch wall outlet and has two lead wires to connect to 12V DC power.
- Weight: 0.2 oz.
- Width: 0.4 in.
- Height: 0.1 in.
- Sold by unit: foot
- LED Spacing: 0.3 in. (between centers)
- Cuttable: every 1.5 in.
- Light Beam Angle: 120°
- Input Voltage: 12V DC
- Max. length of one run: 16 ft.
- Color Temp.: 2700k-5500k
- IP Rating: IP40
- Fixture Surface Temp. 68° - 104° F
- UV/IR Radiation: None
- Lifespan: 50,000 hours
- Lumens/ ft: 432-504
- CRI: 70-75
- LEDs per foot: 54
Each 13 foot (high density) or 16 foot (standard) section needs to be separately wired to the power supply to avoid voltage drop.
Not compatible with Strip Light Channels.
|Beam Angle (deg.)||120|
|Color Temperature (K)||2700K-5500K|
|Color||Warm White to Cool White|
|Color Rendering Index (CRI)||70-75|
|Luminous Flux (LM)||432-504|
|Number of LEDs||54|
|Power Consumption||5.8w / foot|
|Rated Life (Hours)||50000|
|Voltages (V)||12V DC|