Diode LED DI-1101 1ft 2700k-5500k K-Range Tunable Color Light LED Strip

Diode LED 1 Foot DI-1101 Tunable LED Strip from Warm White 2700k - 5500 Cool White

K-Range Tunable Color Strip Light gives you total control over the white color temperature of your LED lighting. With the K-Range Dual Slide Switch (DI-1100) you can choose the exact shade of white light for your LED lighting, as well as dim your lights from 100% to 5%. This strip light, which is also available in a high density version that is twice the brightness, enables you to set up dimmable, color-temperature-controlled white LED lights.

K-Range Tunable Color Strip Light offers full tuning of color temperature, from warm white (2700k) to cool white (5500k) with every color temperature in between. This strip uses a mix of warm white, neutral white, and cool white chips, which the K-Range Dual Slide Switch (DI-1100) dims and brightens to allow you to smoothly and easily transition between color temperatures. After choosing the right color temperature, lock it in with the toggle on the switch.

K-Range Tunable Color Strip Light comes in one foot sections, and a maximum of 10 one-foot strip sections can be seamlessly connected together in a continuous sequence. Runs longer than 10 feet can be configured, but each 10 foot section needs to be hard-wired back to the power supply. These additional accessories are essential for a K-Range Strip installation: the K-Range Dual Slide Switch (DI-1100) and one K-Range Strip-to-Strip Connector (DI-1102) for each foot of strip light. We also offer a K-Range Strip Light 39 Inch Extension (DI-1103) for extending the distance between strip sections and between the K-Range Dual Slide Switch and initial K-Range strip section. Each strip section comes with 3M adhesive tape on the back for easy mounting.

The K-Range Tunable Color Strip Light and K-Range Dual Slide Switch run on 12V DC and can be powered by either a 12V Non-Dimmable Hard-Wired Driver or a 12V Plug-In Adapter. The K-Range Dual Slide Switch fits into a standard light switch wall outlet and has two lead wires to connect to 12V DC power.

• Weight: 0.2 oz.


• Width: 0.4 in.


• Height: 0.1 in.


• Sold by unit: foot


• LED Spacing: 0.45 in. (between centers)


• Cuttable: every 4 in.


• Light Beam Angle: 120 Degrees


• Input Voltage: 12V DC


• Max. length of one run: 16 ft. (standard) / 13 ft. (high density)


• Color Temp.: 2700k-5500k - Warm White to Cool White


• IP Rating: IP40


• Lumens: 162-189


• Power Consumption: 2.2w / ft


• CRI: 70-75


• LEDs per foot: 27


• Fixture Surface Temp. 68° - 104° F


• UV/IR Radiation: None


• Lifespan: 50,000 hours

Each 13 foot (high density) or 16 foot (standard) section needs to be separately wired to the power supply to avoid voltage drop.

Not compatible with Strip Light Channels.