The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The color mixing system with cyan, yellow and magenta diachronic filters creates virtually unlimited color hues, coupled with smooth blends between color changes. Color sequences and blends can be selected from a pre-programmed internal controller, with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system.
Other Version: DOLOMITE CYM 600 HFT (with wireless DMX receiver)
Discharge lamp MSD 575
575 W, 43.000 lm, 6.000 degrees K
Average rated life 3.000 hours
GX 9,5 base
Ordering code LP0997
Available on request: MSA 600 lamp (575W), 6000 hours,
40.000 lm, 6000 degrees K
Pressure die cast aluminum body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
The optical system utilizes an aluminum ellipsoidal reflector and produces a beam of approximately 35 degrees Additional filters are available for alternative beam adjustments.
COLOR CHANGER SYSTEM:
CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta diachronic filters can create virtually any desired color.
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
Internal controller with a choice of eight pre-programmed color change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
Two internal axial fans (80x80 mm and 120x120 mm) keep the level of heat within the unit constant and help dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
230 V, 50 Hz, 3,5 Amp
|Application||IP65 Color Changers|
|Light Source||Discharge lamp MSD 575|
|Lamp Wattage (W)||575|
|Lamp Life (Hrs.)||3|
|Luminous Flux (LM)||43.000|
|Voltage (V)||230V 50Hz|