Product Description
The unit is 1, 2, or 4-channel MATRIX DMX DIMMER pack. This pack can serve as a stand-alone chaser or a DMX dimmer pack. This pack is designed for zero-crossing circuitry, which protects against inductive loads. Each channel comes with two 3-prong Edison sockets for USA or IEC sockets for Europe. This unit features XLR female and male connection for DMX compatibility. Each channel is Equipped with a fuse, the Max.
Features - Output: 4.5Amp per channel, True 15Amp. Maximum
- Mode button - this button will change the power packs operate mode between DMX and chaser.
- Menu button - this button will activate the different functions in DMX and chase modes.
- Up button - this button will increase the displayed value in the LCD display.
- Down button - this button will decrease the displayed value in the LCD display.
- Power output - 3 prong grounded Edison output sockets or 8 total output sockets.
- Green LED indicators - these LED will indicate their relevant channel activity.
- LED display - this multifunction display will detail all chase and pro-creativity that pertains to the current operating to the current operating mode of the pack.
- Channel fuses - each of the four channels is protected by 10A (120V) or 6.3A(230V) fuse. These fuses prevent you from overloading and damaging your pack. Be sure to always replace with the exact same type fuse.
- Power switch - this switch controls the unit’s main power.
- Power cord - plug this cord into a matching power supply for your area.
- DMX input - this connector accepts your DMX input signal.
- DMX output - this connector sends your DMX input signal through to the next DMX device.
- 5 ft. power cord
Additional Information
| SKU | MATRIX-DMX |
|---|---|
| Manufacturer | Optima Lighting |
| Number of channels | 4 channels |
| Protocol | DMX |
| Voltage (V) | 120/230V 50~60Hz |
| Power | up to 500W per channel, 15Amp total load |
| Warranty | 1 Year Manufacturer warranty |
You may also be interested in the following product(s)
Stage and Studio 16ch Controller & Dimmer Pack SystemList Price: $499.99 Our Price: $349.95 |
Stage and Studio 24ch Controller & Dimmer Pack SystemList Price: $515.99 Our Price: $429.95 |
4 Black PAR CAN 64 500w PAR64 WFL Bulbs O-Clamp DimmerList Price: $399.99 Our Price: $252.24 |
4 Black PAR CAN 64 500w PAR64 NSP Bulbs O-Clamp DimmerList Price: $399.99 Our Price: $252.24 |
4 Silver PAR CAN 64 500w PAR64 MFL Bulbs O-Clamp DimmerList Price: $399.99 Our Price: $252.24 |
Customer Reviews
- beware of using low wattage bulbs and attempting to run them at 20% Review by Cheryl
-
Though this dimmer pack is a good value when you're running high wattage instruments at more than 20%, if you go below that, with either wattage or percentage, you get flickering, and if you go much below 20% they may cut out altogether.Overall Value Quality Feature
However, Bulb America the company was great with me as far as handling my issues with the dimmer pack, and i give them a big thumbs up. (Posted on 5/7/12) - Great Dimmer Review by Todd Jacobs
-
Great dimmer. I can always rely on the dimmers for my shows. (Posted on 2/15/12)Feature Overall Value Quality - MATRIX DMX 4ch. Double Output Dimmer Pack Review by JACK Parker
-
Very good (Posted on 2/8/12)Value Quality Feature Overall - Does not work with Behringer Review by Justin
-
The dimmer pack does all it's said to do, but it does not work properly with Behringer controller boards. I found this out only after I bought one and connected it. If connected in the middle of the DMX chain, all lights connected to it will flicker. If connected at the END of the DMX chain, the entire chain flickers (i.e., all dimmer packs). (And a terminator was connected at the end). The tech. at Bulb America said it did not work with Behringer controllers, but NO where on the website or in the description did it state anything about this pack not working properly with all controllers. I didn't think DMX was that complicated a technology, but apparently there's more to it. (Posted on 12/23/11)Feature Overall Value Quality - Dimmer Pack Working Great Review by David Roman
-
Although I've only had a chance to scratch the surface of this units capabilities, I have to say I'm impressed with it. Were most switchers / faders I've had in the past were pretty much just DMX controlled, this unit has a series of built in features that worked well. Also, I attached a string of LED christmas lights expecting the fader not to work (many faders need extra to run LED lights) and even though it seemed a bit steppy- the fade function DOES work - at least on the set I tried. All in all a great unit - especially for the price! (Posted on 12/1/11)Overall Value Quality Feature - Fast, nice quality, very nice experience... Review by Mike
-
I'm very satisfied with the product, the service, and the price. (Posted on 11/26/11)Overall Value Quality Feature - A good value DMX dimmer Review by Barry
-
Works great and is attractively priced. Physical construction and materials are a bit more lightweight than some more expensive models, but this unit seems to function perfectly. As usual, GREAT service from bulbamerica. (Posted on 11/9/11)Feature Overall Value Quality - barrnone Review by Sammy
-
These are great value dimmers. I now own four and am not afraid to send them out on rental. Great roi (Posted on 10/26/11)Value Quality Feature Overall - barrnone Review by Sammy
-
These are great value dimmers. I now own four and am not afraid to send them out on rental. Great roi (Posted on 10/26/11)Value Quality Feature Overall - Works well, nice features Review by Dale
-
if driving 4 500W lights, one on is quite a bit brighter than if 2, 3 or 4 are on at max.Overall Value Quality Feature
Fine if you dont need full brightness on all channels at once. (Posted on 9/24/11)
Product Manuals
 |
MATRIX DMX Manual (Size: 570.2 KB) | |
|
MATRIX-DMX-PRO comparison (Size: 104.5 KB) |
