Niagara 150

The innovative IP65 Dimension range is complemented by the first recessed fitting in the range, the new, compact color changer NIAGARA 150. It is primarily designed for flush mounting in ground, and utilises a pressure die-cast aluminum body, sealed with tempered glass at ground level, with a nylon installation sleeve, and has an IP67 weather protection rating.

A 2000kg load bearing ability allows use in vehicles areas. NIAGARA 150 produces, from a CDM-SA/T 150W 6000 hours lamp, a soft edge 51° circular beam, which can project straight up or be pre-adjusted through a +/- 13° swivelling facility. The beam angle can be changed with an optional fresnel lens and this can be combined with an expansion filter for further beam variation. NIAGARA 150 features eight colors and white, with inbuilt speed or time pre-settable auto change. Multiple units can be synchronized in this mode, or controlled via DMX.

LAMP:

Metal halide lamp CDM-SA/T 150
150 W, 12.700 lm, 3.000° Average rated life 6.000 hours
G 12 base

STANDARDS:

Pressure die cast aluminum body. Nylon installation sleeve for ground recessed mounting, fitted with two holes (°0) for power supply tube entry.
The area below the sleeve must be open for drainage and with a gravel soakaway provided.
Body internally fitted with wiring.
Black polyester powder paint.
Front tempered glass shock resistant.
Certified IP67 weather protection
Electrical class: I
Load bearing: 2.000 Kg.

OPTICAL GROUP:

The optical system utilizes an aluminum ellipsoidal reflector and produces a soft edge beam of approximately 51° Lamp swivelling angle +/- 13° Additional filters are available for alternative beam adjustments.

COLOR CHANGER SYSTEM:

1 rotating bi-directional wheel for 8 different colors + white.
BLACK-OUT
100% black-out (on color wheel) available via DMX control.

COLOUR CHANGER SYSTEM:

All functions can be accessed through 1 standard DMX 512 channel. Master/slave option for multiple units synchronization. Stand alone function and scenes speed adjustment.

COOLING:

An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY:

230 V, 50 Hz, 0,8 Amp
Thermal protection.
IP67 certified termination box for the entry of the DMX signal cables.