OPTIMA 150w Double Output LED Strip Power Supply
Quantity: 1
Product Description
- High reliability, low cost
- Built-in EMI filter
- 100% full load burn-in test
- Protections: overload/ short circuit
- DC Output: 12V, 12.5A
- Dimension: 8.00 x 2.00 x 4.00 in
Technical information:
- AC input voltage range: 170~264VAC (210~370VDC)
- Input frequency: 47~63Hz
- Inrush current: cold start, 40A/230V
- Input leakage current: <0.7mA/ 230VAC
- Line regulation (full load): ±0.5%
- Output voltage adjust range: ±10%
- Output overload protection: 110~150%
- Withstand voltage:
I/P -O/P: 1.5KVAC/1min
I/P -F/G: 1.5KVAC/1min
O/P-F/G: 0.5KVAC/1min
- Rise time: 50ms @ full load (typical)
- Hold up time: 20ms @ full load (typical)
- Operating temp. & humidity:-10C~+50C, 20%~90% RH (non condensing)
- Storage temp. & humidity:-20C~+85C, 20%~95%RH (non condensing)
- Cooling method: convection
*Power Cord not Included
Additional Information
| UPC Code |
675650001372 |
| Manufacturer |
Optima Lighting |
| Equipment Type |
Power Supply |
| Power |
12V |
| Current (Amp) |
12.5A |
| Length (in) |
8.00 |
| Height (in) |
2.00 |
| Width (in) |
4.00 |
OPTIMA 5M RGB 300 SMD LED Waterproof Silicone Cover Flexible Strip
Quantity: 1
Product Description
16.4Ft. (5 Meter) RGB Waterproof Silicone Cover LED Strip with 5050 SMD chips, 60 LED per Meter, 3M Tape backing for easy mounting
This flexible LED Strip are sold at continuous 16.4 feet length. You are able to cut at every 3 LEDs. LED Strip can be cut to size at marked intervals and rejoined by a simple solder or solder less connection.
These 12 volt LED Strips are sold in one reel of 16.4 feet (5 meters) increments. If you select a quantity of "1", you will get a roll of 16.4 feet (5 Meter) LED Strip. If you select a quantity of "3", you will get 3 rolls of 16.4ft./roll total length = 49.2 feet (15 Meter), and so on.
Designed for both the lighting professional and amateur, this LED Strips are very easy to install and uses 3M Tape backing for easy mounting. Just peel and stick to any clean flat surface.
LED Strips require a Power Supply with a 12V DC output.
You can find the Power Supply needed for your LED Strip by multiplying the LED Strip Length with Power Consumption/ Meter (3.28Ft.)
Example:
LED Strip Length = 5 Meter (16.4Ft.)
Power Consumption = 14.4W / 1Meter (3.28Ft.)
Power Supply needed = 5 x 14.4W = 72W = > you will need a Power Supply with a higher Wattage output than 72W
Additional Information
| UPC Code |
675650001600 |
| Manufacturer |
Optima Lighting |
| Application |
Ideal for Cove lighting, showcase lighting, signage, channel letters, symbols, accents, borders, architectural lighting, landscape lighting, step lighting, decorative lighting, and especially for narrow area lighting such as under cabinet lighting or unde |
| Beam Angle (deg.) |
30 |
| Color |
RGB Color Mixing |
| Luminous Flux (LM) |
360Lm/3.28Ft |
| Number of LEDs |
60 pcs/3.28Ft. |
| LED Chip Size |
5050 SMD |
| Cable Type |
Silicone Cover |
| Power Consumption |
14.4w / 3.28ft (72w / Roll) |
| Wavelength (nm) |
585-595nm |
| Rated Life (Hours) |
50000 |
| Voltage (V) |
DC 12V |
| Length (in) |
196.8 |
| Height (in) |
0.472 |
| Width (in) |
0.472 |
12v 8-key 3 channel LED controller with RF remote
Quantity: 1
Product Description
12V RGB LED Controller with 8 Button on/off, pause/play, speed +/-, brightness +/-, manual +/-, RGB indictor, on indictor, signal receiving indicator and RF remote
Additional Information
| UPC Code |
675650002171 |
| Manufacturer |
Optima Lighting |
| Equipment Type |
Controller |
| Number of Fadders |
8 |
| Operation Temperature (F) |
-68 ~ 140° |
| Connectors |
Screw Terminal |
| Output |
3 channels |
| Power Consumption |
<1W |
| Current (Amp) |
4A(each channel) |
| Voltage (V) |
12 |
| Length (in) |
4.76 |
| Width (in) |
0.98 |
| Height (in) |
2.08 |
| Weight (lbs) |
0.52 |
