Pantheon OS CYM 400

PANTHEON OS CYM 400 is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46 degrees. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The color mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited color hues, coupled with smooth blends between color changes. Color sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system. Other Version: PANTHEON OS CYM 400 HFT (with wireless DMX receiver) LAMP:400 W, 28.000 lm, 5.600 degrees K Metal halide lamp HQI-TS 400/D Average rated life 6.000 hours Special base Ordering code LP1006 STANDARDS: Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Maximum ambient temperature: 35 degrees C. Maximum operating temperature: 100 degrees C. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17. OPTICAL GROUP: The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35 degrees . Additional filters are available for alternative beam adjustments. COLOR CHANGER SYSTEM:CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired color. BLACK-OUTA simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller. CONTROL:Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector. COOLING:An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage. POWER SUPPLY:230 V, 50 Hz, 2,5 Amp

Manual:

Pantheon OS CYM 400 Catalogue
Pantheon OS CYM 400 Electrical Layout
Pantheon OS CYM 400 Manual
Pantheon OS CYM 400 Photometrics
Pantheon OS CYM 400 WIring Diagram
IP Rating Chart