0

(888)505-2111

Colosseo OS CYM 1000 HFT

Colosseo OS CYM 1000 HFT

Item SKU: AD3254
Manufacturer:

Griven

$ 6,423.18 $ 8,992.46

Sorry, this product is temporarily out of stock.

Description

COLOSSEO OS CYM 1000 HFT is fitted with a wireless DMX receiver for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. The high light output afforded by the HQI 1000W lamp means that it can be used to light up large buildings, giving even color coverage over a large area. The projector can be mounted in any orientation, which means, for example, that a tall building could be lit from top and bottom, or, using two pairs of units, from the middle of both sides facing towards the opposite corners. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The color mixing system with cyan, yellow, and magenta diachronic filters creates virtually unlimited color hues, coupled with smooth blends between color changes. Color sequences can be selected from a pre-programmed internal controller with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller, or from any DMX 512 control system. LAMP:1000W, 90.000 lm, 5.900°K Metal halide lamp HQI-TS/D/S 1000 Average rated life 6.000 hours Special base. Ordering code LP1008 STANDARDS:Pressure diecast aluminum body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I . Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17. OPTICAL GROUP The optical system utilizes an aluminum parabolic reflector and produces a soft edge beam of approximately 35°. Additional filters are available for alternative beam adjustments. COLOR CHANGER SYSTEM:CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta diachronic filters can create virtually any desired color. BLACK-OUT:A simulation of a black-out effect is achieved by the simultaneous closing of all diachronic filters, which is controlled from an external DMX controller. CONTROL:Internal controller with a choice of eight pre-programmed color change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector. COOLING:An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage. POWER SUPPLY:230V, 50Hz, 1,7 Amp.

Specs

Application IP65 Color Changers
Light Source HQI-TS/D/S 1000
Lamp Wattage (W) 1000
Lamp Life (Hrs.) 6
Luminous Flux (LM) 90.000
Weather Protection IP65
Voltage (V) 230V 50Hz
Current (Amp) 1,7
Length (in) 22.79
Width (in) 21.25
Height (in) 21.65
Weight (lbs) 49.60

Additional Info