Product Description
The Right Arm™ adds pan and tilt capabilities to a wide range of static theatrical and studio lighting fixtures, allowing the designer to maximize the lighting rig without crowding fixtures or over-extending the budget. Video cameras and LCD projectors can be blended into the lighting rig with minimal preparation, providing easy adjustment from the lighting console. The Right Arm™ conveniently repositions these devices in theatrical and church productions, corporate events, trade shows - anywhere flexibility in the light plot is needed.
The Right Arm contains a two point integral balancing system that allows the use of fixtures which are front or rear heavy, i.e. a long throw ellipsoidal or an ellipsoidal using a color changer on the front, without adding counter weights or modifying the fixture.
The Right Arm offers a wide range of adjustment for fixture heights and widths without removing shutters or existing yokes.
A great feature of the Right Arm is that the pan and tilt range can be defined using built-in range presets. This limits the Right Arm to areas that require light and increases accuracy. An optional speed control channel provides smooth movement with all loads and speeds. With the repositioning capabilities of the Right Arm, reductions in equipment costs, labor costs, and safety hazards may be realized.
Specifications:
Capacity: 40lb
Pan: 340°
Pan Speed: 180° in 6 seconds
Pan Torque: 5 foot-pounds average
Tilt: 270°
Tilt Speed: 180° in 6 seconds
Tilt Torque: 10 foot-pounds average
Ratings: UL STD 73 Compliant
CE Pending
TUV Pending
Drive System: High Torque Stepper Motors
Power: Built-in Universal Power Supply
Operating Voltage: 90-260 VAC, 50/60 Hz (auto select)
Arm Rated Power: 50 VA maximum
Fixture Power Cord Rating: 15 amps, 250 volts max
Accessory Port Power Total: 24 volts DC
Current Required for Right Arm Alone: .5 amps
Power Cables: 1 for Arm (connector not included) 1 for fixture (connector not included)
Data Connectors: XLR 5-pin, male/female
Accessory Outputs: 2 XLR 4/pin, female
The Right Arm contains a two point integral balancing system that allows the use of fixtures which are front or rear heavy, i.e. a long throw ellipsoidal or an ellipsoidal using a color changer on the front, without adding counter weights or modifying the fixture.
The Right Arm offers a wide range of adjustment for fixture heights and widths without removing shutters or existing yokes.
A great feature of the Right Arm is that the pan and tilt range can be defined using built-in range presets. This limits the Right Arm to areas that require light and increases accuracy. An optional speed control channel provides smooth movement with all loads and speeds. With the repositioning capabilities of the Right Arm, reductions in equipment costs, labor costs, and safety hazards may be realized.
Specifications:
Capacity: 40lb
Pan: 340°
Pan Speed: 180° in 6 seconds
Pan Torque: 5 foot-pounds average
Tilt: 270°
Tilt Speed: 180° in 6 seconds
Tilt Torque: 10 foot-pounds average
Ratings: UL STD 73 Compliant
CE Pending
TUV Pending
Drive System: High Torque Stepper Motors
Power: Built-in Universal Power Supply
Operating Voltage: 90-260 VAC, 50/60 Hz (auto select)
Arm Rated Power: 50 VA maximum
Fixture Power Cord Rating: 15 amps, 250 volts max
Accessory Port Power Total: 24 volts DC
Current Required for Right Arm Alone: .5 amps
Power Cables: 1 for Arm (connector not included) 1 for fixture (connector not included)
Data Connectors: XLR 5-pin, male/female
Accessory Outputs: 2 XLR 4/pin, female
Additional Information
| SKU | AC-RIGHT-ARM |
|---|---|
| Manufacturer | Apollo Gobos |
| Power | Built-in Universal Power Supply |
| Current (Amp) | .5 |
| Length (in) | 7 |
| Height (in) | 23.3 |
| Width (in) | 15 |
| Weight (lbs) | 34 |
Product Manuals
 |
Right Arm Manual (Size: 1.9 MB) | |
|
Right Arm Spec Sheet (Size: 2 MB) | |
|
Right Arm Specifications (Size: 29.4 KB) |
Recently Viewed Products
Related Products
Check items to add to the cart or select all
