Other Version: VESUVIO OS CYM 250 HFT (with wireless DMX receiver)
250W, 20.000 lm, 5.100°K
Metal halide lamp HQI-TS 250/D UVS
Average rated life 6.000 hours
Ordering code LP1004
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I .
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and
CEI EN 60598-2-17.
The optical system utilises an aluminium parabolic reflector and produces a soft edge beam of approximately 40°. Additional filters are available for alternative beam adjustments.
COLOR CHANGER SYSTEM:
CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired color.
A simulation of a black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector.
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
230V, 50Hz, 1,7 Amp
|Application||IP65 Color Changers|
|Light Source||HQI-TS 250/D UVS|
|Lamp Wattage (W)||250|
|Lamp Life (Hrs.)||6|
|Luminous Flux (LM)||20.000|
|Voltage (V)||230V 50Hz|