Diode LED DI-0002 3528 SMD FLUID VIEW 16.4ft cool white 5000k High Performance Luxury LED Light StripsSKU: DI-0002
Sorry, this product is temporarily out of stock, please check Related Products below, or use the email for stock updates
Diode LED DI-0002 3528 SMD FLUID VIEW 16.4ft cool white 5000k High Performance Luxury LED Light Strips
The FLUID VIEW Strip Light is a light fixture that has it all. It's flexible, field-cuttable every two inches to a custom length, and dimmable. It's extremely low-profile, at a tenth of an inch high and third of an inch wide, it can be used virtually anywhere. It's a 12v fixture that draws 1.44 Watts per foot, making it very economical. To top it off, it comes in a rainbow of colors: cool white, amber, pink, red, blue and purple.
Each spool comes with both a DC plug and lead wires attached that allow for easy connection to a power source, whether a 12v Plug-in Adapter or a Hard-Wired Driver, so it's plug-and-play. It comes with a 3M adhesive backing which allows for easy mounting on a clean, dry surface.
The FLUID VIEW Strip is applicable in a lighting solutions liek interior coves and nooks, cabinets, hallways, display cases, shop windows, and exhibits. Fluid View Strip Light is great for any close application lighting.
The FLUID VIEW Strip can be powered by either a Plug-in Adapter or Hard-Wired Driver. The FLUID VIEW Strip can be dimmed by our in-wall REIGN 12v/24v Dimmer Switches or by the Diode LED Hard-Wired Dimmable Drivers.
- Connectors come with one 3 foot bare wires on one end and a 12 inch white female DC plug on the other end.
- Voltage: 12V DC
- Color Temp: 5000k
- Color: Cool White
- IP Rating: Indoor
- Lifespan: 50000 hours
- Width: 0.3 in.
- Height: 0.1 in.
- Lead Wire Length: 6 in.
- LEDs per foot: 18
- LED Spacing: 0.65 in (between centers)
- Cuttable: Every 3 LEDs / 2 in / 5 cm
- LED Type: 3528 SMD LED
- Beam Angle: 120 degrees
- Power Consumption per ft: 1.44W
- UV/IR Radiation: None
- Lumens per foot: 115
- CRI: 75
Each 16.4 ft (196.8 inches) FLUID VIEW Strip Light section needs to be separately wired to the power supply to avoid voltage drop.
|1.44w / ft|