Diode LED DI-0051 FLUID VIEW 9.5ft Warm White 3528 SMD LED High Performance Luxury Waterproof LED StripsSKU: DI-0051
Sorry, this product is temporarily out of stock, please check Related Products below, or use the email for stock updates
Diode LED DI-0051 FLUID VIEW 9.5ft Warm White 3528 SMD LED High Performance Luxury Waterproof LED Strips
FLUID VIEW Wet Location Strip Light is commercial-grade strip designed for outdoor and indoor home and business use and is waterproof (but not submersible) with a wet location rating of IP68. Drawing only 1.44 watts of power per foot, these dimmable strips are extremely energy-efficient. This flat strip is only a quarter inch high by a third of an inch wide, so it can be installed virtually anywhere.
Boat owners find FLUID VIEWs great for onboard deck lighting, galleys, and sleeping quarters. Automotive experts use them for footwell illumination, in the glove box, under the chassis, or even under the hood. These strip lights are ideal for restaurants and retail stores; decorative and accent lighting; garden, deck, and patio lighting; boats and camping. They can be used for lighting art, food, and wine cellars (no UV emissions and low heat); trade show exhibits and outdoor tent lighting; under cabinet lighting, bookshelves, cupboards, and drawers. They also light pathways, stairways, and architectural models.
For simple assembly, connect the strip to our Waterproof Plug to DC Adapter Connector (DI-0710) and a Plug-In Adapter. Each spool comes with a pair of Waterproof Solder Connectors to connect the strip to a Hard-Wired Driver. The FLUID VIEW can also be powered by any of our hard-wired dimmable drivers which connect to household wiring and a 120V AC dimmer. The wet location FLUID VIEW is installed by simply mounting it where you wish with the 9 clips, 18 screws, 5 end caps, and 1 Waterproof Solder Connector Pair that are included with each spool.
- Spool Length: 9.5 ft.
- Width: 0.4 in.
- Height: 0.25 in.
- Connector Type: 4 in. waterproof plug
- Color: Warm White
- Color Temp: 2700k
- Lumens: 1092
- CRI: 75
- LEDs per foot: 18
- Weight: 4 oz.
- LEDs per foot: 18
- LED Spacing: 0.65 in. (between centers)
- Cuttable : every 3 LEDs / 2 in.
- LED Bulb Type: 3528 SMD LED
- Beam Angle: 120°
- IP rating: IP68
- Voltage: 12V DC
- Power Consumption per ft.: 1.44W / 120mA
- Fixture Surface Temp.: 68° - 104° F
- UV/IR Radiation: None
- Lifespan: 50,000 hours
Each 19 foot section (two 9.5 foot spools) needs to be separately wired to the power supply to avoid voltage drop.
9 clips, 18 screws, 5 end caps, and 1 Waterproof Solder Connector Pair are included with each spool.
Not recommended as submersible or for use in or around treated, chlorinated or salt water.
|1.44w / ft|