Diode LED DI-0928 300W 12v Non Dimmable Hard Wired DriverManufacturer: SKU: DI-0928
Sorry, this product is temporarily out of stock, please check Related Products below, or use the email for stock updates
Diode LED DI-0928 300W 12v Non Dimmable Hard Wired Driver
Our Hard-Wired Indoor Non-Dimmable Drivers provide steady 12 Volt current along with high efficiency, so you will get the most from your LED lights and see savings on your power bill. All our 12V LED drivers are energy-efficient, eco-friendly, safe, and produce very little heat. If you’re working with a permanent home installation, it’s vital to use a Diode LED solid state driver as it provides an even, stable current. It is a hard-wired power source and it’s typically placed in a wall or ceiling, in the attic or under the house, but is also compact enough for areas with limited space.
This 12V Driver is compatible with 120V AC electrical systems, with a frequency of 60 Hz (North and Central America). Hard-Wired Non-Dimmable Drivers should be hard-wired to household AC power by a licensed electrician. Any of our dimmable light fixtures, powered by a hard-wired driver, can be dimmed using the REIGN 12V Dimmer Switch.
Note: All our power supplies are UL Listed or UL-Recognized Component. The manufacturer rates each power supply for maximum power output at optimum thermal and voltage conditions. As with any power supply, true actual maximum continuous current output depends upon various environmental factors such as ambient temperature, line voltage fluctuations, and orientation that may affect heat dissipation. For optimum performance, do not load the power supply to more than 80% of its labeled rating.
*Drivers that are compatible with the Meanwell Junction Box.
- Input Voltage: 100V - 240V AC
- Output Voltage: 12V DC
- Frequency Range: 50-60 Hz
- IP Rating: indoor
- Safety: UL1310 Class 2, TUV EN60950, CB Report
- Dimensions: W: 3.9 in, L: 8.25 in, H: 1.9 in
Note: 200W, 300W, and 600W drivers have a built-in fan that makes audible noise.