However, the standard front diffusion glass and the manually adjustable zoom between 17º and 24º make the projector highly suitable for long distance coverage, as well. Other beam angles can also be achieved with optional additional filters. Color sequences and blends can be selected from a pre-programmed internal controller, with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system.
Other Version: EVEREST CYM 900 HFT (with wireless DMX receiver)
Discharge lamp MSD 700
700 W, 50.500 lm, 6.000 °K
Average rated life 3.000 hours
G 22 base
Ordering code LP0700
Pressure die cast aluminum body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
The optical system utilizes an aluminum parabolic reflector
to produce a 7° hard edge beam. A soft edge beam between 17° and 24° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment.
Additional filters are available for alternative beam adjustments.
COLOR CHANGER SYSTEM:
CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired color.
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
Internal controller with a choice of eight pre-programmed color change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
230 V, 50 Hz, 5,8 Amp
|Application||IP65 Color Changers|
|Light Source||Discharge lamp MSD 700|
|Lamp Wattage (W)||700|
|Lamp Life (Hrs.)||3|
|Luminous Flux (LM)||50.500|
|Voltage (V)||230V 50Hz|