16.4ft RGB 300 SMD Flexible LED Strip w/ Power Supply and Controller Package

Optima Lighting SKU: LED-STRIP-PD2
$21999 $285.99 USD

Sorry, this product is temporarily out of stock, please check Related Products below, or use the email for stock updates


0

Description

OPTIMA 5 Meter 16.4Ft. RGB 300 LED Strip
This flexible LED Strip are sold at continuous 16.4 feet length. You are able to cut at every 3 LEDs. LED Strip can be cut to size at marked intervals and rejoined by a simple solder or solder less connection. These 12 volt LED Strips are sold in one reel of 16.4 feet (5 meters) increments. If you select a quantity of "1", you will get a roll of 16.4 feet (5 Meter) LED Strip. If you select a quantity of "3", you will get 3 rolls of 16.4ft./roll total length = 49.2 feet (15 Meter), and so on. Designed for both the lighting professional and amateur, this LED Strips are very easy to install and uses 3M Tape backing for easy mounting. Just peel and stick to any clean flat surface. LED Strips require a Power Supply with a 12V DC output. You can find the Power Supply needed for your LED Strip by multiplying the LED Strip Length with Power Consumption/ Meter (3.28Ft.) Example: LED Strip Length = 5 Meter (16.4Ft.) Power Consumption = 13.2W / 1Meter (3.28Ft.) Power Supply needed = 5 x 13.2W = 66W = > you will need a Power Supply with a higher Wattage output than 66W
Manufacturer Optima Lighting
Application (Market) Ideal for Cove lighting, showcase lighting, signage, channel letters, symbols, accents, borders, architectural lighting, landscape lighting, step lighting, decorative lighting, and especially for narrow area lighting such as under cabinet lighting or unde
Beam Angle (deg.) 30
Color RGB Color Mixing
Luminous Flux (LM) 360Lm/3.28Ft.
Number of LEDs 60 pcs/3.28Ft.
LED Chip Size 5050 SMD
Cable Type Uncovered
Power Consumption 13.2w / 3.28ft (66w / Roll)
Wavelength (nm) 585-595nm
Rated Life (Hours) 50000
Voltage (V) DC 12V
Length (in) 196.8
Height (in) 0.472
Width (in) 0.472

OPTIMA LIGHTING 150w Double Output LED Strip Power Supply LED-HF150-12
- High reliability, low cost - Built-in EMI filter - 100% full load burn-in test - Protections: overload/ short circuit - DC Output: 12V, 4.6A - Dimension: 6.30 x 3.86 x 1.54 in (160 x 98 x 39mm) Technical information: - AC input voltage range: 170~264VAC (210~370VDC) - Input frequency: 47~63Hz - Inrush current: cold start, 40A/230V - Input leakage current: <0.7mA/ 230VAC - Line regulation (full load): 0.5% - Output voltage adjust range: 10% - Output overload protection: 110~150% - Withstand voltage: I/P -O/P: 1.5KVAC/1min I/P -F/G: 1.5KVAC/1min O/P-F/G: 0.5KVAC/1min - Rise time: 50ms @ full load (typical) - Hold up time: 20ms @ full load (typical) - Operating temp. & humidity:-10C~+50C, 20%~90% RH (non condensing) - Storage temp. & humidity:-20C~+85C, 20%~95%RH (non condensing) - Cooling method: convection *Power Cord not Included
Manufacturer Optima Lighting
Equipment Type Power Supply
Power 12V
Length (in) 7.83
Height (in) 1.97
Width (in) 3.86

OPTIMA RF 6-key Controller with WIFI remote
2V RGB LED Controller with 8 Button on/off, pause/play, speed +/-, brightness +/-, manual +/-, RGB indictor, on indictor, signal receiving indicator and RF remote

SKU LED12-RF8B
UPC Code 675650002171
Manufacturer Optima Lighting
Equipment Type Controller
Number of Fadders 8
Operation Temperature (F) -68 ~ 140
Connectors Screw Terminal
Output 3 channels
Power Consumption <1W
Current (Amp) 4A(each channel)
Voltage (V) 12
Length (in) 4.76
Width (in) 0.98
Height (in) 2.08
Weight (lbs) 0.52

Video

Additional Info

Manual:

LED RGB Tech

More Videos:

YouTube