Pantheon OS CYM 400 HFT

$3,91299 $5,478.99 USD

Sorry, this product is temporarily out of stock, please check Related Products below, or use the email for stock updates


PANTHEON OS CYM 400 HFT is fitted with a wireless DMX receiver, for trouble free control of large or otherwise difficult installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information. It is equipped with an optical system that produces a long throw beam of approximately 46. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The color mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited color hues, coupled with smooth blends between color changes. Color sequences can be selected from a pre-programmed internal controller, with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system. LAMP:400 W, 28.000 lm, 5.600K Metal halide lamp HQI-TS 400/D Average rated life 6.000 hours Special base Ordering code LP1006 STANDARDS: Pressure die cast aluminum body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Maximum ambient temperature: 35C. Maximum operating temperature: 100C. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17. OPTICAL GROUP: The optical system utilizes an aluminum ellipsoidal reflector and produces a soft edge beam of approximately 35. Additional filters are available for alternative beam adjustments. COLOR CHANGER SYSTEMCYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta diachronic filters can create virtually any desired color. BLACK-OUTA simulation of black-out effect is achieved by the simultaneous closing of all diachronic filters, which is controlled from an external DMX controller. CONTROL:Internal controller with a choice of eight pre-programmed color change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector. COOLING:An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage. POWER SUPPLY: 230 V, 50 Hz, 2,5 Amp


Application IP65 Color Changers
Light Source HFT
Lamp Wattage (W) 400
Lamp Life (Hrs.) 6
Luminous Flux (LM) 28.000
Weather Protection IP65
Voltage (V) 230V 50Hz
Current (Amp) 2,5
Length (in) 20.03
Width (in) 16.18
Height (in) 21.96
Weight (lbs) 42.99

Additional Info